Saturday, February 27, 2016

Evacuation Center / Covered Court, Mondragon

One of my project wherein I and Engr. Ray Ramilo worked together and hand in hand for the Structural Analysis and Design Calculation, preliminary design, final design. We are the contractor of this 22meter span x 33meter, using 10mmx4"x4" Angle Bars, 3mmx2"x8" C Shape Purlins... These STEEL TRUSSES was designed to withstand 280-300 KPH wind speed. TYPHOON NONA with WIND SPEED OF 220-230 KPH that hit Northern Samar on December 14, 2015 didn't destroy the roof framing and roofing while some structures in Northern Samar were severely destroyed, some partially damaged..





Thursday, November 19, 2015

Las Navas Northern Samar Road Anomaly

Brian Cox visits the world's biggest vacuum chamber - Human Universe: Ep...

Gov. Jose Ong, ipinagmalaki ang pagtaas ng turismo sa Northern Samar

Northern Samar Gov. Jose Ong: We are not preventing anyone from running ...

Bawal ang Pasaway kay Mareng Wennie


Northern Samar Gov. Ong, ipinaliwanag ang kaniyang 2014 SALN | Bawal ang Pasaway kay Mareng Wennie...

My Fellow Nortehanon you may listen the interview of Mareng Wennie of  the Governor of Northern Samar Jose Ong.

Sunday, January 25, 2015

Deflection Control as per American Concrete Institute -ACI 435-1995

1. Deflection Control provision as per ACI 435-1995- Reinforced Concrete One-way Flexural Members.

Table 2.2 -ACI 435-1978

Table 2-4 -ACI 435-1978

Table 2-5 -ACI 318-1989
2. Deflection of Two-Way Slab Systems;

a. Minimum thickness requirements; as per section 9.5 of ACI 318, is shown in Table 4.2, are based on experience gained over many years.

Table 4.2 Maximum Permissible computed deflection

Friday, November 7, 2014

History of Structural Steel, Design and Construction

I will post about this topic soon..based on research, studies, reading of numerous books authored by Professor Charles G. Salmon, P.E., PhD., Professor William Segui, P.E., PhD., Professor Jack C. McCormac, P.E., PhD., Venancio I. Besavilla, C.E. Master in Management Engineering author of books, Philippines, daniel T. Li-Structural Engineer State of California, USA.


Industrial Arch Truss -Railway Station

Steel Construction Manual

Steel Column -Tube and Pipes by Daniel T. Li-Structural Engineer, USA

Steel Purlin by Daniel T. Li-Structural Engineer-California, USA

Steel Purlin Design -I developed this for my Design
Steel Angle Bars
Double Angle Capacity

Steel Truss using AISC 13th edition specifications